367 Arts and Crafts Building (College)

These buildings are designed primarily as work and rehearsal centers with large, open areas and large window and door openings. Floor finishes vary depending on the specific use of a given area. For example, vinyl composition tile is commonly found in the general and fine arts area while hardened concrete flooring can be found in the ceramics area. The best qualities include well-appointed performance or concert halls for dramatic arts and music.

Portions of these buildings are designated for display and storage. Extensive electrical outlets, lighting and plumbing are typically found.

The following are not included in the costs: Furnishings and movable equipment.

Availability of Elevators by Area for this occupancy: No

Marshall Valuation Service sections: 18 and 48.

Typical Lives:

					Class
Quality	A	B	C	D	H	M	P	S	W
Low	45	45	40	35	--	--	35	35	--
Average	50	50	45	40	--	--	40	40	--
Good	60	60	50	45	--	--	45	45	--
Excellent	60	60	55	50	--	--	50	50	--

Quality Selection Guide:

Class A (Fireproof Structural Steel Frame): and Class B (Reinforced Concrete Frame):

Quality	Exterior Walls	Interior Finish	Mechanicals	HVAC
Low	Brick, precast concrete, good block, some trim	Plaster or drywall, acoustic tile, VCT, crafts, limited rehearsal facility	Minimum lighting & plumbing	Warm and cool air (zoned)
Average	Brick, concrete or metal panels, formed concrete	Plaster or drywall, acoustic tile, vinyl, hardwood, rehearsal rooms, studios	Adequate lighting & plumbing, some extra features	Hot and chilled water (zoned)
Good	Face brick, stone, concrete or metal panels, solar glass	Plaster or drywall, acoustic tile, carpet and vinyl, good music, dramatic arts	Good lighting, plumbing and sound, extra features	Hot and chilled water (zoned)
Excellent	Fine masonry, special architecture and trim	Acoustical design, performance and practice halls, good studios	High-quality lighting and sound, good plumbing	Hot and chilled water (zoned)

Class C (Masonry Bearing Walls):

Quality	Exterior Walls	Interior Finish	Mechanicals	HVAC
Low	Brick, block, tilt-up panels, bearing walls, wood joists, little trim	Painted walls, acoustic tile or drywall ceilings, asphalt tile, craft studios	Minimum lighting & plumbing	Heat pump system
Average	Steel frame, brick, block, concrete, some ornamentation	Plaster or drywall, acoustic tile, vinyl composition, hardwood, rehearsal stages	Adequate lighting & plumbing	Warm and cool air (zoned)
Good	Steel columns, web or bar joists, ornamental block or face brick	Plaster or drywall, acoustic tile, hardwood or vinyl, small halls	Good fluorescent fixtures, good plumbing, some extra features	Hot and chilled water (zoned)
Excellent	Steel frame, face brick, metal panels, tile, highly ornamental	Acoustical design, performance and practice halls, good studios	High-quality lighting and sound, good plumbing	Hot and chilled water (zoned)

Class D (Wood or Steel Framed Exterior Walls):

Quality	Exterior Walls	Interior Finish	Mechanicals	HVAC
Low	Wood frame, stucco or siding, little ornamentation	Drywall, acoustic tile, asphalt tile, linoleum or wood floors, craft studios	Minimum lighting & plumbing	Heat pump system
Average	Wood frame or pipe columns, good stucco or siding with some trim	Plaster or drywall, acoustic tile, vinyl composition, hardwood, rehearsal stages	Adequate lighting & plumbing	Warm and cool air (zoned)
Good	Steel or glulam frame and joists, brick veneer, glass, best stucco	Plaster or drywall, acoustic tile, hardwood or vinyl, small halls	Good fluorescent fixtures and plumbing, some extra features	Hot and chilled water (zoned)

Class P (Pole Frame):

Quality	Exterior Walls	Interior Finish	Mechanicals	HVAC
Low	Pole frame, metal panels, finished inside, little trim	Painted walls, acoustic tile or drywall ceilings, asphalt tile, craft studios	Minimum lighting & plumbing	Heat pump system
Average	Pole frame, insulated metal panels, some ornamentation	Drywall, acoustic title, vinyl composition or hardwood, studios, rehearsal stages	Adequate lighting & plumbing	Warm and cool air (zoned)

Class S (Metal Frame and Walls):

Quality	Exterior Walls	Interior Finish	Mechanicals	HVAC
Low	Pre-engineered, finished interior, insulation	Painted walls, acoustic tile or drywall ceilings, asphalt tile, craft studios	Minimum lighting & plumbing	Heat pump system
Average	Pre-engineered, sandwich panels, some trim	Drywall, acoustic tile, vinyl composition or hardwood, studios, rehearsal stages	Adequate lighting & plumbing	Warm and cool air (zoned)